changzhou huahui fuel injection equipment co.,ltd website.

Email

[email protected]

Tel

HOME
ABOUT US
PRODUCTS
- Fuel Injector
- Nozzle
- Fuel Pump
- Plunger
- Delivery Valve
- Control Valve
- Others
PRODUCTION STRENGTH
FAQ
NEWS
CONTACT US

Diesel engine injection nozzle
As the core couple of the injector, the micron sealing surface is achieved through laser grinding, with atomized particles ≤20μm, and the fuel utilization rate is increased by 15%. It is temperature-resistant to 200 ° C and compatible with biodiesel. It is suitable for commercial vehicles, agricultural machinery and ship engines, and supports over 2,000 hours of bench test life.
Piston oil pump CB-18
The fuel injection pump assembly is crucial in the engine oil supply process. It can achieve an injection accuracy of ±0.5mg per cycle, and inject oil at a pressure of up to 180MPa, allowing the fuel to be fully atomized and efficiently mixed with the air. Effectively enhance engine power output by about 8%, reduce exhaust emissions, and is suitable for all types of diesel power machinery.
Fuel pump assembly
The fuel injection pump assembly is the fuel control hub of the engine. Fuel can be injected as needed at a pressure of about 150MPa, and the injection interval error is controlled within ±0.1ms. Optimize the combustion process, increase engine power by about 10%, reduce fuel consumption, and are widely used in construction machinery, generator sets and other equipment.
Multi-cylinder pump assembly
The injection pressure can reach 140MPa, the injection operation can be completed in milliseconds, and the injection angle deviation is controlled at ±2°. Optimize engine working conditions and increase power by about 7 - 10%. It is suitable for trucks, ship main engines, etc. to ensure strong and stable power.

PRODUCTS

«
1
2
3
4
5
6
»

Leave Your Message

Leave a message

Huahui